|
Ebay offers Refurbished Creality K1 Max 3D Printer for $470.40 (reg $679) after code with free shipping. Apply Code: BESTOFBRANDSProduct Features:- 600MM/S
HIGH-SPEED PRINTING - The Creality K1 Max 3D printer is designed for
efficiency, boasting a maximum speed of 600mm/s and 20000mm/s²
Acceleration, which is 12 times faster than a regular Fused Deposition
Modeling 3D printer. Perfect for professionals and beginners.
- 11.8x11.8x11.8in
LARGE PRINTING SIZE - The K1 Max boasts an impressive printing size of
300×300×300mm, allowing for multiple models to be printed
simultaneously, significantly increasing printing efficiency.
Additionally, its print volume to printer size ratio can reach up to
25.5%, the biggest compared with similar-sized printers.
- SMART
AI LIDAR & CAMERA - The 1m resolution LiDAR will scan the first
layer on its own. It will pause printing and tell you immediately if
something goes wrong. And K1 Max uses an AI camera to watch over
spaghetti failure, foreign objects, debris, etc. It will alter you when
an error occurs. It also supports real-time monitoring and creates
time-lapses for sharing. Furthermore, The strain sensors in the heatbed
generate an accurate leveling mesh for auto compensation.
- OUT-of-THE-BOX
- K1 Max is assembled and calibrated before shipment, and it offers a
boot-up quick guide, and allows self-test with one tap. So, users can
print right out of the box. The Creality K1 Max offers hands-free auto
leveling, the strain sensors in the heatbed deliver hands-free leveling,
while the AI LiDAR scans the bed tilt at million points for more
precise leveling. Its heatbed heats to 60℃ in just 90s. Ensuring perfect
prints every time without the hassle.
- 32mm³/s
FlOW & DUAL COOLING - A new ceramic heater encircling the hotend
can melt various filaments instantly. The dual-gear direct drive
extruder and titanium alloy heatbreak ensure 32mm³/s full-blast feeding
flow in up to 300℃. The freshly printed model is cooled rapidly by two
fans, one on the printhead with directional air ducts, and another in
the build chamber. The model hardens before any stringing and warping
could happen.
Category: Computers
Posted on 17 November 2024, 06:59 AM
|
