|
Amazon offers NexCyber Level 2 EV Charger for (reg. $499.99) after code with free shipping.
Apply Code: TYVD6IVR
Product Description: -
[Up to Max 40A by Nema 14-50p Plug or Max 48A by Hardwired]:
Preconfigured for NEMA Type 14-50P compliant with 2017 NEC Section
625.17 for up to 40A or convert to Hardwired for up to 48A. Professional
installation recommended for optimal safety and performance. [Install
The Power Outlet Cord]: No smaller than 6AWG if charge 40-48A,no smaller
than 8AWG if charge 32A.
-
[DESIGNED WITH J1772 Connector for All North America Non-Tesla
EVs/PHEVs. For Tesla EVs, THIS will REQUIRE an j1772 to Tesla ADAPTER]:
Compatible with Tesla cars (Adapter needed, not included), Ford, GM,
Audi, Kia, Honda, Kia, Hyundai, Gmc, Chevrolet Bolt, VW ID 4, Nissan
Leaf, Ford Mustang Mach-E, IONIQ 5/6, BMW i3, i4, iX, Jeep Wrangler 4xe,
etc.
-
[Safety & Faster Charging with ETL, FCC Certified]: Meets the
Safety Criteria Defined by: SAE J1772, UL2231-1/-2, UL 991, UL 2231, UL
2251, UL1998 and UL 2594. (ETL and FCC certified EV car charger with
3-year Warranty)
-
[Plug-play Mode(The Default Setting), Smart Touch Screen, No APP
Needed]: Clearly show the charging amperage, charging speed, input
voltage, delay time, etc. For the touch buttons: 1. Pull out the
charging gun before press the buttons, otherwise no respond; 2. Long
press "Ⓐ" or "Time" button to enter the setting interface, then you can
adjust the amperage from 16A to 48A freely or Set the charging start
time; 3. You can do "factory reset" if doesn't charging.
-
[Smart WIFI APP, You can Set the Charging Period]: By APP, you can
wirelessly check the charging cost, history, fully-charged notification,
track the charging status, during off-peak period, etc. [Wi-Fi
Reset/Factory Reset Function, Add New Device Quickly]: If you can't find
your device or you have replaced a new phone, just pull out the
charging latches, simultaneously long press the Ⓐ button and time
adjustment button on the product screen until it shows "Factory Reset",
then wait 3-5 seconds and re-start your device.
-
[Nema Type 3 Protection Degree & 25ft Long Bold Cable]: Approved by
NEMA Type 3, the NexCyber home ev charger has a certain extent of IP65
waterproof. (We don't suggest install in the direct sunlight or exposure
rainy day.) Equipped with 25 feet military grade charging cable, the
drop-resistant plug endures over 10,000 charges, super durable.
-
[Question & Answer: "E-Stop Fault" or "Stop Charging Suddenly after
a while"]: Solutions: 1. Confirm whether the side big button "E-stop
button" works normally. 2. Press the "E-stop" button, then recover the
position. 3. Re-start your machine, then it will work normally. [Factory
Reset Setting]: Press and raise the emergency stop button, repeat the
operation three times, then restart your ev charger.
Category: Automotive
Posted on 21 July 2025, 12:21 PM
|
