|
Amazon offers ATDIAG Automotive Wire Tracer for after code free shipping with Amazon Prime. Apply Code: UEQI75ZI Product Description: Multifunction
Electrical Tester：ATDIAG automotive circuit tracer, equipped with a
transmitter and receiver, easily locates short circuits, open circuits,
and wiring faults. By observing changes in the LED strip, you can
determine whether the fault is a short circuit or an open circuit,
without damaging the insulation. Suitable for professional electricians,
maintenance technicians, and DIY enthusiasts. ⚠️Important: Designed
only for 6–42V DC circuits. Do not use on AC power
Efficient Short Circuit Location: Circuit tester of a transmitter and a
receiver. Flip the transmitter switch downward. A flashing red
indicator signifies a short circuit. Turn on the receiver, which offers
three adjustable sensitivity modes (switch to MODE3 when signal
reception is poor). When in use, position the receiver perpendicular to
the circuit. A beep accompanied by a red LED indicates the short circuit
location has been pinpointed. In areas without short circuits, the
receiver does not light up.This product delivers clear status alerts
through dual audio-visual cues
Precise Circuit Breaker Finder: Flip the transmitter switch downward to
energize. A flashing green indicator signifies an open circuit/break.
Turn on the receiver and position it perpendicular to the wire under
test. When the beep and green LED strip stop or show a distinct change,
the open circuit location is indicated. In areas without breaks, the
receiver's signal light will remain steady with a rapid beep. 🔌 Tip:
After testing, disconnect the circuit first, then turn off the
transmitter
Dual Audio-Visual Alerts: This product employs both audible and visual
signals to deliver immediate, clear feedback. Audio tones and bright LED
indicators adjust with signal strength, helping you quickly pinpoint
faults. A low-battery warning flashes red when power is insufficient.
Includes two 9V batteries for both receiver and transmitter. This is an
efficient, precise circuit breaker finder tool
Continuity Function: ATDIAG electrical tester feature is only available
on the transmitter. Switch the transmitter to CONT mode and connect the
red and black clips to both ends of the wire. A lit green light
indicates a good circuit condition; if it does not light up, it
indicates a circuit fault. ✅ Remember: Slide the switch back to OFF
after use
Superior Compatibility: DC voltage 6-42V automotive diagnostic tool,
suitable for cars, pickup trucks, trucks, motorcycles, speedboats, RVs,
excavators, and other equipment. Includes four different types of fuse
plugs to meet your diverse needs.For any questions or concerns, please
contact us at Atdiag@outlook.com
Category: Automotive
Posted on 27 April 2026, 03:57 PM
|
